|
 |
AutoVent 2000 NEW !
Product Details:
The LSP AutoVent series integrates field experience
and engineering excellence, producing a lightweight, transportable
automatic ventilator. Both the AutoVent 2000 and 3000 meet the
American Heart Association standards for automatic ventilators.
Designed for patients over 44 pounds, both units utilize state-of-the-art
pneumatics to assure reliable, time-cycled, constant flow capabilities
driven by a minimum of source gas. The additional capability of
adjustable inspiratory time makes the AutoVent 3000 ideal for
institutional applications. Independent controls for rate and
tidal volume on the AV2000, and the additional inspiratory time
settings on the AV3000, can be adjusted quickly and monitored
at a glance. The AutoVent 2000 and the AutoVent 3000 may be used
with standard resuscitation masks or standard endotracheal and
tracheostomy tubes
|
|
Ambu Matic Automatic Resuscitator - Ambumatic Standard
(Includes Patient Valve Circuit)
Product Details:
Features:
Compact and lightweight, pneumatically powered ventilator for
emergency and transport situations. The Ambu Matic fits in various
emergency cases, soft packs etc. Single-slide control for physiologically
coherent settings of frequency and tidal volume. Manual override
button for hyperventilation. Oxygen concentration switch for ventilation
at either 60% or 100% oxygen concentration. The low setting increases
the available treatment time. Fixed pressure limiting valve setting
at 60 cm H2O for increased patient safety. Pressure gauge (optional)
for indication of airway pressure. Ventilation monitor (optional)
with mechanical and electronic pressure gauge, incorporating alarm
systems for airway pressure indication and prompt recognition
of irregularities in airway pressure, i.e. disconnection or power
failure, airway obstruction, stacking of ventilation or excessive
loss of ventilation volume through the pressure limiting valve.
|
LSP MTV 100 MANUALLY TRIGGERED VENTILATOR
- w/6 02 Hose
Product Details:
A new generation in oxygen-powered, manually-triggered breathing
devices. The MTV 100 provides clinicians with greater versatility,
improved safety and enhanced performance over similar devices.
Meets current AHA CPR guidelines. Delivers 40 liters per minute
during the manually-triggered breath. During the spontaneous breath,
the MTV 100 functions to provide minimal work of breathing for
the patient with a low initial opening pressure and a built-in
pneumatic circuit that provides gas flow as high as 120 liters
per minute. The MTV 100 also creates a new level of pressure limiting
safety and performance. The red, ergonomically placed, smart button
and associated pneumatics instantaneously limit pressure to 60
cmH20 and simultaneously terminate flow. All functions are created
utilizing minimal parts making the MTV 100 more reliable, serviceable
and cost effective to operate. The MTV 100 opens to ambient air
in the event of gas power failure. The oxygen inlet hose attaches
to a 360° swivel connection. Also includes a secondary safety
pressure relief to relieve pressure at 70 cmH20. The innovative
design and functions of the MTV 100 provided by intelligent pneumatic
logic circuits contribute to its extraordinary performance and
safety. The entire unit can be cold sterilized, gas sterilized
or autoclaved. With 6' oxygen hose.
|
|
Minilator 15 Lpm Flow Rate
The LSP Minilator is a compact, lightweight and simple-to-operate
constant flow device which provides oxygen at flow rates up to
15 LPM for one to five patients simultaneously. The unit is comprised
of an anodized aluminum manifold with check valves and threaded
barbed fittings with metered orifices. The Minilator is attached
via an oxygen supply hose directly to an oxygen regulator capable
of delivering 40 to 90 psig. Several Minilators may be connected
in tandem for situations such as disasters where more than 5 oxygen
outlets would be required. System comes complete with aluminum
manifold with 5 02 DISS check valves, 5 screw-on orifices, and
Magnum nylon carrying case [More Info]
|
"UNI-VENT™ 700 SERIES
AUTOMATlC RESUSCITATOR/VENTILATOR - Uni-Vent™ Model 701"
Product Details:
Because only the right amount of gas will do! Adequate
ventilation requires delivering the correct volume of gas in the
right amount of time to ensure vital organ oxygenation. Manual
ventilation of the unprotected airway using a bag valve mask or
manually triggered resuscitator requires maintaining a leak-proof
mask seal while simultaneously controlling breath rate, inspiration
time and oxygen flow. Uni-Vent™ solves the problem. Simply
turn the unit on, set appropriate mode and tidal volume controls,
then concentrate on the mask seal. Manual operation and guesswork
is eliminated. 701 standard unit has a rechargeable battery, AC-DC
operation/recharge, and includes control module, patient valve,
hoses, masks and airway, one-way valve, AC charger adapter and
carrying/storage case. Please call for more details on the many
models available.
|
|
Chrome / Brass Flowmeter w / Ohmeda Quick-Connect
Product Details:
These precision Medical Flowmeters in a rugged chrome
plated brass . Features a 0-15 LPM flow rate, Lexan flowtube and
positive shut-off control valve that will not drift from a set
flow rate over extended durations.
Flowmeter Dial 0-25 Lpm
Product Details:
A flow tube and the durable metal body prevent the
breakage problems long associated with standard flowmeters. the
compact size allows the unit to fit into tight headwall areas
and makes it virtually damage proof when other equipment is installed.
accuracy is assured at every flow setting without the need for
a visible float as in thorpe tube flowmeters. the knurled flow
adjustment knob and the large easy-to-read numbers make flow adjustments
easy.
|
Oxygen RMF Series Regulator with Flowmeter 0-15
LPM, CGA 540 Inlet connection
Product Details:
TECHNICAL FEATUES:
Single stage, diaphragm style.
2in double scale gauge: 0-300 kg/cm2 (4000 psi).
Maximum inlet pressure: 200 kgf/cm2 (3000 psi).
Pre-adjusted outlet pressure: 3.5 kgf/cm2 (50 psi).
Relief valve, set point @ 6.0 kgf/cm2 (85 psi).
Maximum outlet flow: 15 LPM.
Chrome plated brass body.
Encapsulated seat with sinterized filter (cartdrige).
Highly durable polycarbonate (Lexan) flowtube / flowtube cover,
minimize breakage.
CGA / Yoke inlet connection (handtigth connection available).
DISS Outlet connection.
|
|
Oxygen Regulator 0-15 LPM
Product Details:
Oxygen Regulator. 0-15 LPM. Barb Outlet. With Gauge.
Regulator Brass 0-15 Lpm Lsp
Product Details:
Truction is the feature in this lsp brass regulator |
|
|
|
|
